Single and three phase AC sources to 150 kVA, 600 Vln output — built for worldwide utility, 400 Hz avionics and shipboard power simulation.
From a 150 W bench load to a 150 kVA frequency converter cabinet, Adaptive Power Systems engineers the source, the load and the measurement instrument that close your test loop.
Reproduce any grid on the planet. Adjustable output frequency and a wide voltage window duplicate worldwide utility configurations, 400 Hz avionics and 50/60 Hz shipboard buses.
Programmable loads for R&D, ATE and production lines — from 150 W economy benches to multi-hundred-kilowatt racked systems with dynamic transient profiles.
Close the loop with traceable measurement. The M2000 Series multi-channel analyzer delivers laboratory-grade accuracy with single-button ease of use, backed by free instrument GUIs.
Large hybrid and full-electric battery packs only reveal their weaknesses under fast, repeatable transient discharge. The 5VPxC Series high power programmable DC loads were designed for exactly that workload: five built-in battery test profiles, high slew-rate dynamic stepping and master/slave paralleling when a single 60 kW chassis is not enough.
When a production cell or an entire test bay needs clean, programmable AC power, the APF1000 and APF3000 Series deliver it in a single cabinet. An intuitive colour touch screen replaces cryptic menus, so operators can switch between 50 Hz, 60 Hz, 400 Hz and custom voltage set-points without a manual — a proven way to reduce setup errors on multi-region export lines.
UPS manufacturers, PV inverter engineers and rectifier designers normally juggle two separate load banks. The 3C Series combines both: 350 Vac and 500 Vdc input capability, 1,875 VA/W to 22,500 VA/W per system, plus dedicated UPS, PV inverter, battery discharge and AC rectifier test modes in firmware.
Tell us the standard, the device under test and the power envelope — our engineers configure or combine instruments into an application-specific test system.
Tailored or combined instruments that meet R&D and ATE requirements without breaking the capital budget.
Learn More →400 Hz avionics, MIL-STD and shipboard power simulation with matching AC and DC load banks.
Learn More →High power, high reliability solid state frequency converters for export manufacturing and facility power.
Learn More →Battery, PV inverter, fuel cell and storage development supported on both the source and load side.
Learn More →Output voltage reaches 600 V line-to-neutral (1039 V line-to-line) with fully adjustable output frequency, so a single source can reproduce worldwide utility conditions, 400 Hz avionics buses and 50/60 Hz shipboard power. Capacity spans bench-top FC300 converters through 150 kVA APF3000 Series cabinets. See the AC source range.
Yes. The 5VPxC Series delivers up to 60 kW per chassis with master/slave paralleling and five built-in battery discharge profiles for packs to 1000 Vdc, while 3C and 3D Series AC+DC loads add UPS, PV inverter and AC rectifier test modes. Review load models.
Depending on model, APS instruments offer GPIB, USB and LAN control with documented command sets, plus free AC Load, DC Load and DC Power GUI applications for quick bench operation and data logging. Download the software overview.
Contact the representative closest to your facility for regional pricing, availability and on-site commissioning, or download full datasheets from our brochure library first. Find a local representative | Brochures
Send us your device under test, the applicable standard and the power envelope. Our application engineers will recommend a configuration — and tell you honestly when a smaller instrument is enough.
Contact Adaptive Power Systems Visit Support