Factory-certified multi-channel power analyzers, load banks, and high-voltage circuit breakers configured for harsh ambient and high-capacity electrical testing in Qatar.
40.5kV 60Hz 3-phase AC switchgear for heavy industrial utility protection and grid load isolation.
Contact Us
Compact dummy load bank designed for precision UPS capacity testing and localized power verification.
Contact Us
Heavy-duty industrial load system supporting 440V, 380V, and 220V grid simulation and turbine testing.
Contact Us
Mobile high-precision electrical test unit optimized for rack-level server and data center commissioning.
Contact Us
Advanced grid-tied energy recovery system with dynamic telemetry feedback for burn-in testing.
Contact Us
Precision power measurement module engineered for server power supply verification and field services.
Contact Us
Rigorous industrial-scale testing container supporting line voltages from 115V up to 690V AC.
Contact Us
Ruggedized field testing apparatus for emergency standby generator testing and UPS battery maintenance.
Contact UsIn the rapidly modernizing infrastructure of Qatar—spanning the massive liquefied natural gas (LNG) export expansion at Ras Laffan, hyperscale data centers in Lusail, and smart grid sub-stations overseen by Kahramaa (Qatar General Electricity & Water Corporation)—maintaining high power factor stability, low Total Harmonic Distortion (THD), and transient circuit integrity is paramount. Engineering contractors and electrical utility auditors require high-precision equipment to measure and validate multi-channel power metrics under severe ambient operational conditions.
As a global leader and premier exporter of multi-channel power analyzers, high-voltage vacuum load switches, and programmable regenerative load banks, our systems are explicitly engineered to eliminate power conversion losses, prevent phase imbalances, and ensure continuous grid compliance up to ambient operating temperatures exceeding 50°C.
Modern electrical power conversion systems—ranging from 3-phase industrial inverters and grid-tied solar farms to commercial uninterruptible power supplies (UPS)—demand simultaneous dynamic measurement across multiple input and output phase channels. Standard single-channel power meters fail to capture complex phase-angle displacement, high-frequency harmonic distortion up to the 100th order, and inter-channel voltage ripple simultaneously.
Our flagship M2000 Multi-Channel Power Analyzer Series provides high-speed sampling (up to 5 MS/s) across independent voltage and current channels. This capability allows Doha electrical engineers to compute real power (kW), apparent power (kVA), reactive power (kVAR), power factor (PF), and phase balance in real time, delivering documented verification for grid interconnection compliance.
Analyze 3-phase AC input and multi-bus DC output simultaneously with zero phase-shift timing errors between channels.
Recycle up to 93% of tested electrical energy back to the local distribution grid, reducing operating heat and carbon footprint.
Internal thermal management systems certified for continuous operation in Qatar's summer temperatures exceeding 50°C.
To assist procurement teams and principal engineers in select testing hardware for projects in Doha, the following matrix outlines key technical performance parameters across our primary test equipment families:
| Equipment Series | Primary Voltage Range | Channel / Capacity Configuration | Measurement Precision | Optimal Local Application |
|---|---|---|---|---|
| M2000 Power Analyzer | 0.5V to 1000Vrms AC/DC | Up to 8 Synchronized Channels | ±0.05% Reading Accuracy | Substation Harmonic & Efficiency Audit |
| CNXE FZRN21 Switchgear | 40.5 kV Outdoor AC 60Hz | 3-Phase High-Voltage Load Isolation | 31.5kA Breaking Capacity | Heavy Utility & Substation Protection |
| 1500KW Container Load Bank | 115V up to 690V 3-Phase | 1500 kW Modular Resistive Load | 1kW Step Resolution | Large Standby Generator Commissioning |
| 5VPxC Series High-Power DC Load | Up to 1000 Vdc Input | 60 kW per Chassis (Parallelable) | Dynamic Slew Rate Control | EV Pack & Energy Storage System Testing |
| 3C / 3D Series AC+DC Loads | 350 Vac / 500 Vdc Input | 1.8 kVA to 22.5 kVA per System | 0.0 to 1.0 PF Adjustable | UPS & Solar PV Inverter R&D Testing |
Exporting high-precision electrical test instrumentation into the Middle East requires deep familiarity with Qatar's localized infrastructural challenges:
A. Hyperscale Data Center Commissioning in Doha & Lusail: Portable resistive load banks (such as our 1KW and 100kW units) allow facility managers to perform thermal validation of server racks, verify automatic transfer switches (ATS), and load-test uninterruptible power supply (UPS) batteries before server hardware deployment.
B. Substation & High-Voltage Utility Maintenance: The installation of CNXE FZRN21-40.5D vacuum load switch breakers provides robust protection against overcurrent surges, allowing safe switching of power lines under high 60Hz grid loads common across industrial sector substations.
C. Marine & LNG Terminal Power Auditing: At Ras Laffan and Mesaieed industrial ports, shipboard power conversion systems operate across dynamic 50Hz, 60Hz, and 400Hz frequency envelopes. Our programmable AC power sources simulate international shore power configurations, allowing engineers to benchmark electrical frequency conversion efficiency under full operational load.
Over two decades of international engineering excellence, stringent quality control, and dedicated technical support for Middle Eastern projects.
Every multi-channel power analyzer and programmable load bank is individually calibrated and shipped with factory calibration certification traceable to international standards, ensuring 100% acceptance by Kahramaa auditors.
Constructed with heavy-gauge corrosion-resistant alloy enclosures, high-duty forced-air cooling blowers, and vibration-dampened sub-assemblies specifically tailored to withstand desert transport and sandy environments.
Our precision multi-channel power analyzers support high-speed continuous sampling up to 5 MS/s per channel with isolated voltage measurement ranges from 0.5V up to 1000Vrms direct input (and up to 100kV with high-voltage probes), making them ideal for high-frequency inverter and grid distortion analysis.
Yes. Equipment built by our production facilities adheres strictly to IEC 62271-100 for high-voltage switchgear and IEC 61000 standards for electromagnetic compatibility, fulfilling all technical prerequisites set by Kahramaa and regional EPC consultants.
Our high-power resistive and regenerative load banks feature elevated thermal design margins, high-CFM industrial forced-air fans, and automatic thermal derating protection, enabling continuous full-load testing even at ambient temperatures of 50°C.
Yes. The 3C and 3D Series electronic load banks support dual AC (up to 350 Vac) and DC (up to 500 Vdc) input configurations with programmable constant current (CC), constant voltage (CV), constant resistance (CR), and constant power (CP) testing modes in firmware.
We maintain streamlined export logistics via Hamad Port and Doha International Airport. Standard equipment models ship within 2 to 4 weeks, accompanied by full Certificate of Origin (COO), commercial documentation, and dedicated engineering commissioning support.
Speak directly with our power test application engineers to specify the exact load bank, circuit breaker, or multi-channel power analyzer system required for your project in Qatar.